Home / Product Information / Product Domain / Edge Computing Materials / ARTON Resins / Main Characteristics

Product Information

Edge Computing Materials

ARTON Resins

Main Characteristics

(1) High Heat Resistance
ARTON has the highest heat resistance among transparent resins.


(2) Low Water Absorption
ARTON is lower in water absorption than PC and acrylic resin, and has a characteristic of being less influenced by water absorption. Having a hard polymer framework, even if water is taken into the structure, ARTON can minimize change in bulk.

 

(3) High Transparency
ARTON has a high transparency of more than about 93% in the visible range.


(4) Low Specific Gravity
ARTON has a lower specific gravity than PC and acrylic resin, and can be reduced in weight.


(5) Moldability and Transcription Property
ARTON has an inherent tendency of depending on the shearing speed and has a low melt viscosity in the high speed shearing range, in which an injection molding is performed. ARTON is superior in molding.

 

(6) Adhesion
ARTON has a good adhesion with a metal layer and has a characteristic of being hard to be peeled off.


(7) Chemical Proof



Contact Us
Edge Computing Div.
Edge Device Dept.
Headquarters
1-9-2, Higashi-Shimbashi, Minato-ku, Tokyo 105-8640, Japan
TEL: 81-3-6218-3581、03-6218-3572
FAX: 81-3-6218-3691
<Products>
  • Heat Resistant Transparent Resins
  • Heat Resistant Transparent Films
Edge Computing Div.
Connecting Solution Dept.
Headquarters
1-9-2, Higashi-Shimbashi, Minato-ku, Tokyo 105-8640, Japan
TEL: 81-3-6218-3580 FAX: 81-3-6218-3691
<Products>
  • Optical Fiber Coating Materials
Product Information